|
|
Rank: Specialist
Joined: 10/13/2007
Posts: 159
Location: Auckland, New Zealand
|
Hey Will, is there any chance of the Needler ever being available outside of BrickConventions?
Sorry if this question has been asked (and answered) before...
MiPod
"What do iPods and guns have in common?" You ask? Well, if I told you that, I'm afraid I'd have to kill you! ; )
Gotta Love a Mac...
|
|
Rank: Member
Joined: 5/19/2008
Posts: 13
Location: Australia
|
I really, really, REALLY wish I had the chance to get one. By the way, Will, are you coming to brickvention next year?
|
|
Rank: Advanced Member
Joined: 12/10/2007
Posts: 121
Location: Colorado
|
Right! No more bidding for me! While the Chief is a fine minifig with top-notch accessories, I can't spend any more money on him because I need some cash for college. While I think the Chief would look awesome menacing me on my computer desk with his needler, I think a computer might look better on said desk. Good luck any prospective buyers and enjoy! ^_^
Dub it like tovarisch would!
|
|
Rank: Forums Administrator
Joined: 9/12/2007
Posts: 902
Location: Redmond, WA
|
Syther Snake wrote:I really, really, REALLY wish I had the chance to get one. By the way, Will, are you coming to brickvention next year? While I'd love to vist Australia some time, it is just too darn expensive these days for me to travel outside the US. Besides, the wife and kids would want to come along and that would totally blow the budget! ;)
|
|
Rank: Member
Joined: 5/19/2008
Posts: 13
Location: Australia
|
Will wrote:While I'd love to vist Australia some time, it is just too darn expensive these days for me to travel outside the US. Besides, the wife and kids would want to come along and that would totally blow the budget! ;) Darn it! But Will, do you know if other sellers are coming there? Please answer my question. P.S: Will, I think you need to change the "Featured Fan Photo" know. Anonymous Fanatic has been there for ages.
|
|
Rank: 'A' Company Commander
Joined: 11/12/2007
Posts: 586
Location: The barren wasteland we call Earth
|
Syther Snake wrote:
Darn it! But Will, do you know if other sellers are coming there? Please answer my question.
There was one of Will's resellers there in January, so I would think Darrel (his Aussie Reseller) would go to Brickvention again.
|
|
Rank: Elite Commando
Joined: 4/15/2008
Posts: 1,014
Location: South Carolina, USA
|
Will wrote:Syther Snake wrote:I really, really, REALLY wish I had the chance to get one. By the way, Will, are you coming to brickvention next year? While I'd love to vist Australia some time, it is just too darn expensive these days for me to travel outside the US. Besides, the wife and kids would want to come along and that would totally blow the budget! ;) Maybe just you and the wife could go :) Anyway, I was wowed to see how high the Chief sold for. Very cool. I don't remember how high the medic went for, but it must have been phenomenal.
 "Time to let 'Ol Painless out of the bag!"
|
|
Rank: Advanced Member
Joined: 6/1/2008
Posts: 69
Location: In your PANCAKES!
|
With all the awesomeness I think my head might explo.....BOOM!
If at first you don't succeced, call an airstrike. - Unknown
PS: Sorry for not being on the fourms for a while. I'm working on an army of elite but foolish commandos, so expect a vig and just the squad soon.
|
|
Rank: Private
Joined: 7/20/2008
Posts: 1
Location: Where I am.
|
When i read that the needler was not for mass-market i think i died a little on the inside. just kidding (mostly) although i so wish i get my hands on one. Or three. Have you considered, Will, That even though it may cost allot to make, from the talk around here sounds like you could charge anything you want for a needler and people will pay it? Even I would pay $10-$15 upwards for one. Or three. And yeah, they might moan, and complain, but there STILL going to pay for one. Or three. Just a thought.
|
|
Rank: Member
Joined: 7/18/2008
Posts: 15
Location: USA
|
Popchik wrote:When i read that the needler was not for mass-market i think i died a little on the inside. just kidding (mostly) although i so wish i get my hands on one. Or three. Have you considered, Will, That even though it may cost allot to make, from the talk around here sounds like you could charge anything you want for a needler and people will pay it? Even I would pay $10-$15 upwards for one. Or three. And yeah, they might moan, and complain, but there STILL going to pay for one. Or three. Just a thought. Well he won't do that, But you could bid on the Chief!
|
|
Rank: Forums Sheriff
Joined: 9/16/2007
Posts: 813
Location: Canada
|
Quote:When i read that the needler was not for mass-market i think i died a little on the inside. just kidding (mostly) although i so wish i get my hands on one. Or three. Have you considered, Will, That even though it may cost allot to make, from the talk around here sounds like you could charge anything you want for a needler and people will pay it? Even I would pay $10-$15 upwards for one. Or three. And yeah, they might moan, and complain, but there STILL going to pay for one. Or three. Just a thought. The popularity of the Needler was not lost on Will. However, there are still no plans to mass produce it for general sale at this time. Quote:But you could bid on the Chief! The auction has been over for some days.
The Jester Laughs Because The World Is Full Of Fools
|
|
Rank: Advanced Member
Joined: 7/20/2008
Posts: 40
Location: USA
|
Ballistic Eagles wrote:Darn! I really wanted another version of the Chief in LEGO form, especially in BrickArms form. Dang! Unfortunately it won't be for sale anymore. *Sobs and cries. . . Then takes a Rocket Launcher from Halo 3 and blows himself up, commiting suicide and waiting 10 seconds to respawn* hahaha thats funny Quote:But you could bid on the Chief! Quote:The auction has been over for some days. no kidding that item is so hot a minifig went for almost $100 jeez that had to be a stressful bid
Life, is, but, a, dream! for the dead and well I, I won't go down by myself but I'll go down with my friends [143t] My Flickr
|
|
Rank: Advanced Member
Joined: 7/22/2008
Posts: 79
Location: Where ever i feel like being.
|
That Needler fits perfectly with what Will makes... because it's a work of art!
[Must think of intelligent remark!]
|
|
Rank: Private
Joined: 7/23/2008
Posts: 2
Location: east coast
|
Is the halo smg going to come out in mass production? cause I sorta was planing on just buying a few, and when I mean a few I mean around the number of 40-50
|
|
Rank: Forums Sheriff
Joined: 9/16/2007
Posts: 813
Location: Canada
|
It already is available: The BrickArms MP7Will it be released sans the suppressor and sight? No, most likely not. The MP7 was designed specifically to allow the removal of those two features to be as simple for the customer as possible. Quote:no kidding that item is so hot a minifig went for almost $100 jeez that had to be a stressful bid Not at all surprising. As I recall the BrickArms Limited Edition Medic minifig went for over 100 dollars. Limited Edition items, as well as custom items, are very popular in the toy world, and tend to fetch very high prices.
The Jester Laughs Because The World Is Full Of Fools
|
|
Rank: Advanced Member
Joined: 1/16/2008
Posts: 48
Location: Cincinnati, OH
|
Rowinish wrote:Is the halo smg going to come out in mass production? cause I sorta was planing on just buying a few, and when I mean a few I mean around the number of 40-50 I think someone already asked that. . . here it is. I've done it to a couple of my MP7s, and it's not particularly difficult (just make sure to cut high on the LAM - you can always sand!). EDIT: Whoops, looks like Damien beat me to it.
"They mostly come at night. . . mostly." Certified BrickArms super-fan.
|
|
Rank: Private
Joined: 7/30/2008
Posts: 4
Location: flickr
|
i r m3str chef! that's awesome! you gotta sell the needler's!
[MOD - I like Arby N' the Chief too, but please write properly (regular spelling and grammar) when posting in these forums. Thanks - badger]
"Surely you can't be serious!"
"I am, and don't call me Shirly!"
|
|
Rank: Member
Joined: 7/21/2008
Posts: 10
Location: vietnam
|
awesome
[MOD - Please keep the "minimum of twenty characters per post" rule in mind. Why is it awesome? - obxcrew]
BA rock
|
|
Rank: Forums Administrator
Joined: 9/12/2007
Posts: 902
Location: Redmond, WA
|
kaboom4 wrote:Syther Snake wrote:
Darn it! But Will, do you know if other sellers are coming there? Please answer my question.
There was one of Will's resellers there in January, so I would think Darrel (his Aussie Reseller) would go to Brickvention again. [ADMIN - Unfortunately, Darrell is no longer my Aussie reseller. However, shipping to Australia is very inexpensive, so please feel free to order from brickarms.com ---Will]
|
|
Rank: Advanced Member
Joined: 1/26/2008
Posts: 149
Location: UK
|
Not to sound like a fool, but someone else is offering their (Or is it actually Bricmarms? 0_o) "The Chief" on eBay again. How much does it cost to produce WaterSlide Decals? Because I want to look at making some of my own...
|
|
|
Guest |
