Thanks! Here are the instructions for all who want them:

Needed: X-Acto or other razor blade, super glue, something to hold the parts still while gluing, PSG-1, AK-47, and G36(for wire stock)
Keep in mind that this is a very difficult mod so be patient.
Instructions:
1. Cut the stock off of the G36 and set it aside
2. Take the AK-47 and cut off the stock and half of the clip (don't discard the stock or clip if you plan on having a stock on your G36 or modding anything with half an AK clip)
3. Carefully(you'll need the other part) cut the AK to look like this (it's circled in red)
4a. Take the piece that you cut off of the AK body and cut it to look like this (also circled in red)
4b. Do not cut the end of the AK barrel off (the piece with the sight on it). I made this mistake and it looks bad because it's another thing to glue.
5. Cut half of the barrel of the PSG-1 off and also cut off the scope and the main body. (It's shown in the picture at the end)
6. Very carefully glue the pieces together so that it looks like my v3. If you need the picture again it's here

That's it! Follow these instructions and you will get a Dragunov v3 if you do it right :P
The last thing is a picture showing where all the parts come from. Picture

If you get stuck or need help just PM me. Thanks for all the support!

---

Death is only the next step towards immortality.

Pretty nice! I would make it if I had the guts to cut up an AK47!!! (My Russian Soldiers need their guns!) 4 3/4 out of 5! :-)))

---

If at first you don't succeced, call an airstrike. - Unknown
PS: Sorry for not being on the fourms for a while. I'm working on an army of elite but foolish commandos, so expect a vig and just the squad soon.

It would make a cool addition for some Russian Special Forces

---

Mishuk gotal'u meshurake, pako kyore. Mandalorian translation: Pressure makes gems, ease makes decay